Performance Description
Instructions for each button:
1. Actual measured current value display
2. Actual temperature value display
3. Ta burning time, also known as test time
4. Ti ignition time, which is the time from the test to the ignition of the specimen
5. Te extinguishing time, which is the time from the test to the extinguishing of the specimen
6. The test time is set to 30 seconds according to the standard. If there are different requirements, please set them separately
7. The experimental temperature is set to 960 ℃ according to the standard. If there are different requirements, please set them separately
8. Heating switch
9. Test start switch
10. Test stop switch
11. Record the ignition time switch (when the test piece is ignited and pressed)
12. Record the extinguishing time switch (pressed when the specimen is extinguished)
The KDZD wire and cable conductor resistivity tester can be used for various ultra-low DC resistance/resistivity tests of wires and cables, shunts, metals, conductors, etc. It can also measure the contact resistance of various switches. Contact resistance of the connector Relay coil and contact resistance; Transformer, inductor, motor, deflection coil winding resistance (for inductive loads, please use the unidirectional current mode for testing); Wire resistance Metal riveted resistors for vehicles, ships and aircraft Printed circuit board lines and hole resistance, etc.
Widely used in petroleum, chemical industry, smelting, paper making, power generation, subway rail transit, instrument industry and scientific research departments and other fields.
KDFRC AC and DC high voltage divider is a special instrument for field high voltage measurement. It can measure both the average value of DC high voltage and the effective value and true effective value of AC high voltage. The whole equipment consists of voltage divider and measuring instrument.
It is mainly used to measure the volume resistivity of conductor materials such as DC resistance of wire and cable conductors, copper rod aluminum rod, copper bar aluminum bar, etc
The instrument is used in research institutions, schools, factories and other units for the application of inorganic metal properties of new materials.
Applicable to electric power, petrochemical, metallurgy, railway, meteorology, industrial and mining enterprises, scientific research institutions, metrology departments, etc
Applicable to electric power, petrochemical, metallurgy, railway, meteorology, industrial and mining enterprises, scientific research institutions, metrology departments, etc
KDZD automatic capacitance and inductance tester is specially developed to solve the problem of measuring capacitor capacitance value in substation
Used to measure and evaluate the grey density of insulators to ensure the performance and safety of power equipment.
An instrument for measuring the resistance value of the surface of an object, widely used in microelectronics, medicine, aerospace, precision machinery and other fields.
Can be used for wire and cable, shunt, metal, conductor and other ultra-low DC resistance/resistivity test.
Suitable for plastic, rubber, thermal insulation materials, insulation materials and other low thermal conductivity materials test
KDYD-YW salt spray test chamber is designed to test the corrosion resistance of various materials after surface treatment, including coating, electroplating, organic and inorganic skin film, anodic treatment, anti-rust oil and other anti-corrosion treatment, so as to establish the quality of the product.
The KDYD-YW salt spray corrosion testing machine is mainly used to test the corrosion resistance of products after surface treatment of various materials, including coatings, electroplating, inorganic and surfacing films, anodizing, anti-rust oil and other anti-corrosion treatments.
