The KDYD-2845kV Intelligent Turn-to-Turn Withstand Voltage Tester is primarily used in industrial environments with strict requirements for electrical insulation performance and large-scale production or maintenance. Its typical application settings have the following characteristics:
Motor and Transformer Manufacturing Workshops/Production Lines: This is the primary application scenario. The instrument is integrated into the final stage of production lines for motors (especially medium and large AC/DC motors) and transformers, serving as a mandatory safety inspection before delivery. On the production line, operators use its "one-button test" and automatic judgment features to perform rapid and efficient turn-to-turn insulation tests on every finished product, ensuring no critical defects like inter-turn short circuits are present before shipment.
Large Equipment Maintenance and Repair Shops: In power plants, heavy machinery factories, or specialized motor repair centers, the instrument is used to verify the condition of motors, generators, and large transformers undergoing repair or overhaul. By comparing the test waveforms with original standard waveforms or those from normally functioning units of the same model, technicians can accurately determine whether the windings were damaged during repair and if the turn-to-turn insulation has been restored to good condition.
Research and Quality Inspection Laboratories: In university, research institute, or third-party testing laboratories, the instrument is used for insulation performance research on new materials and processes, as well as for type testing of products. Its high output voltage of up to 45kV and precise waveform analysis capabilities allow it to simulate extreme operating conditions, providing critical data for evaluating the dielectric limits of new insulating materials and verifying the reliability of product designs.
Environmental Requirements: Due to its large size (180kg cabinet-type unit) and equipped with casters, the instrument is typically placed in a spacious, indoor environment with a level floor. According to the documentation, its normal operating temperature range is 0–40°C, with relative humidity not exceeding 80% at 40°C. Therefore, it should be avoided in harsh environments that are damp, dusty, or subject to drastic temperature changes to ensure test accuracy and equipment longevity. Its sloped display and ergonomic layout also require adequate lighting and workspace in the operating area.
In summary, the KDYD-2845kV Intelligent Turn-to-Turn Withstand Voltage Tester serves three major fields: industrial manufacturing, equipment maintenance, and scientific research/testing. Its application environment emphasizes safety, standardization, and rigorous quality control.
It meets the lightning impulse test requirements of distribution transformers, high-voltage switchgear, current transformers and electromagnetic voltage transformers
Suitable for 6-10KV grade switches and insulators; And the full wave test of lightning impulse voltage of transformer and transformer without cut wave test requirement.
This parameter is applicable to the full wave test equipment of lightning impulse voltage of transformers, transformers, switches and other power products such as 35kV and below.
The test equipment of simulating pulse high voltage is mainly used to carry out impulse voltage test of full impulse voltage wave, truncated impulse voltage wave and operational impulse voltage wave of electric power equipment, and check the insulation pe
The impulse voltage generator test system device is mainly applicable to the impact full wave voltage withstand test of 35kV switch, and can also be used for the impact test of other products.
KDLJ-100KV impulse voltage test device is one of the common items of high voltage test of power equipment. JP cabinet and low voltage switch cabinet of power equipment are required to carry out electric shock protection, dielectric property, electrical ga
This generator is suitable for 10KV and below voltage level of small capacity power transformers, transformers, reactors, arresters, switches, bushings, insulators and other test products for standard lightning impulse voltage full wave test.
KDCJ-200kV10kJ lightning impulse voltage generator is suitable for 10KV and below air gap, reactor switches, insulator strings, bushings, power transformers and transformers and other test products for standard lightning impulse voltage full wave test.
KDCJ-20kV impact pressure testing machine is one of the basic items of high voltage test of power equipment. After design, manufacture and maintenance, it is necessary to carry out impact test verification or inspection.
KDLJ-40 lightning impulse test device can generate impulse voltage (1.2/50μs) and impulse current (8/20μs) for the level III test and limit voltage test of SPD and components in low-voltage distribution system. MOV valve disc, unit and surge protect
KDLJ-100kA/820 lightning impulse test equipment is mainly used for class I and II test of SPD in low-voltage distribution system and Class D test of SPD in low-voltage telecommunication system. It is used to generate lightning impulse current, and carry o
KDYZ-FB square wave impulse current test equipment is designed according to the AC gapless zinc oxide arrester test standards for the system rated voltage below 10KV arrester and zinc oxide resistor small current residual voltage/leakage current test inst
