This vulcanizer computer mouse button and the host panel buttons have the same function, so as to facilitate user operation, the computer software interface is friendly, easy to use, users can accurately measure the burning time, positive vulcanization time, vulcanization index, maximum and minimum torque, etc., is the rubber industry control rubber material quality, rapid inspection and rubber extrusion research commonly used equipment
In the same interface can be a single curve test, multiple curve continuous test and multiple curve comparison test, data stored in the database, can be real-time or historical print all curve data
Provide vulcanization curve, temperature curve

1. High precision and wide range of temperature control.
2, clock programming function. (Set and modify time)
3. Wide voltage range of switching power supply.
4. Imported integrated circuits and control components.
5, the overall processing of one mold cavity, vertical and concentric accuracy is high, non-assembled mold cavity.
6, the main shaft square hole by high precision slow wire processing, high precision.

Mold cavity structure: fully closed type
Temperature control range: normal temperature -200℃
Temperature fluctuation: ≤±0.2℃
Temperature display resolution: 0.01℃
Torque range: 0-20N.M
Torque display accuracy: 0.001N.M
Power supply: 50HZ, ~ 220V± 10%
Compressed air: ≥0.40Mpa
Swing frequency: 100cpm (1.7HZ)
Swing Angle: ±0.5. ±1.
Torque range: (0-5N.m,0-10N.m, 0-20N.m) Automatic
Ambient temperature: 0-35℃ Relative humidity < 80%
Curing time setting range: 2-300min,t90 in the range of 10 seconds to 5 hours.
Print content: Date, time, temperature, vulcanization curve, temperature curve, ML, MH, ts1, ts2, t10, t90, Vc1, Vc2
Dimensions: 600*700*1250mm