1, it can be operated remotely through Ethernet, and can be tested on the spot, the data can be transmitted to the computer through Ethernet, and it can also be read manually on the spot with a U disk.
2, with network alarm function.
3, can be expanded 24, 32, 48, 54, 108 roads.
4, automatic regular inspection of battery terminal voltage, automatic recording of test data.
5, controlled inspection battery internal resistance, terminal voltage, capacity, automatic recording of test data.
6, automatic monitoring of battery performance balance, diagnosis of battery failure, automatic alarm when the battery fails.
7, single battery and battery internal resistance performance status can be observed in the field, can also be observed in the data center. The logo is clear and the display is intuitive.
8, on-site detection without manual intervention, can avoid the risk of short circuit, electric shock and load power failure caused by manual operation error.
9, isolation test loop, neither interference by user equipment, nor affect the normal operation of user equipment and battery pack.
10, battery resource management digital, information.

The system can track the performance balance of the battery, and when the fault battery is found that the performance is seriously deteriorated, the system will immediately alarm, providing a basis for the "fine" maintenance of the battery pack.

1, communication: Ethernet interface, RS-232 interface (can be transferred to RS-485), USB interface
2, single section voltage: 2V, 4V, 6V, 12V
3, voltage accuracy: 0.5%rdg+6dgt
4, internal resistance range: 0.00mΩ-100.00 mΩ
5, internal resistance accuracy: 2%rdg+6dgt
6, the whole group voltage range: according to the actual situation