Profile:
The detection technology adopted by Kaidi Da Da Insulator gray density salt density tester combines gray density test and salt density test into one, which can detect the gray density and salt density of the tested insulator at the same time, simplifying the process of insulator pollution detection, and suitable for use in inspection sites and laboratories.
Features:
Built-in test software, salt dense gray dense integration to complete the test;
Embedded operation, intuitive and fast human-machine interface, parameters can be set flexibly;
Automatic integrated beaker test scheme, after the solution is configured according to the requirements, the method of manual stirring is adopted, and special electrodes are inserted to collect signals;
After the test is completed, please use distilled water to repeatedly clean the special electrode 3 times, and wipe dry storage;
Portable, integrated design for field testing or laboratory use;
The principle of laser frequency conversion transmission can realize the direct test of gray density without filtering, drying and weighing;
Intelligent data analysis, multiple output modes of test results, including direct reading test results, printing reports;
Parameter:
Measuring range: Salt density: 0.01~5.00 mg/cm²; Ash density: 0.01~5.00 mg/cm²; Temperature: 0~100 ℃; Conductivity: 0~200000 us/cm
Measurement accuracy: salt density resolution: 0.0001 bit, full scale accuracy is better than ± 1%; Gray density resolution: 0.0001 bit, full scale accuracy is better than ± 2%; Temperature resolution: 0.1 bit, accuracy better than ±0.5℃; The conductivity resolution is 1/1000 of the electrode range used, and the full-scale accuracy is better than ± 1%
Information output: Touch screen: 5.6-inch true color screen, to achieve good man-machine information interaction; Printer: Microprinter prints measurement results directly.
Power supply: DC: 12.2V / 22Ah lithium battery; Ambient temperature 0~+50 ℃; Relative humidity ≤ 85%RH
Storage conditions: Ambient temperature: -10~+55 ℃; Relative humidity: ≤ 85%RH
Appearance parameters: volume: 420mm×340mm×180mm; Weight: About 5.5kg
