KDJJC-80 insulation oil dielectric strength tester for monomer design, modeling dignified, elegant, generous; 128*64 LCD screen (blue/black/white/green screen is optional). The test process is managed by computer, and the parameters involved such as voltage and time are displayed by a 128*64 lattice backlit LCD display, on which the user will also see the working status of the instrument and rich operation tips.

1. Suitable for testing the dielectric strength of various insulating oils.
2. Equipped with automatic detection function, such as automatically entering the reset state to execute the voltage regulator back to zero.
3. The operation of the instrument is simple, the operator only needs to carry out simple Settings, the instrument will automatically complete the pressure test of the oil sample according to the setting. The breakdown voltage value of 1 ~ 9 times and the number of cycles will be automatically stored, and after the test is completed, the miniature TPUA panel printer can be used to automatically print out.
4. Using automatic magnetron stirring to eliminate the uneven oil sample and bubbles.
5. Use single-chip microcomputer control for uniform voltage boost, the voltage frequency is accurate to 50HZ, making the process easy to control.
6. Perform four sets of standard procedures according to the requirements set by the user.
7. With over-voltage, over-current, limit and other protection to ensure the safety of operators.
8. The dielectric strength of the test is automatically displayed in kV /mm.
9. Using the microprocessor, it can automatically complete the operation of pressure boost, maintain, stir, static discharge, calculation, printing, etc., and can carry out the oil cycle pressure test in the range of 0 ~ 80kV.
10, the use of single-chip microcomputer control for uniform voltage boost, the voltage frequency is accurate to 50HZ, making the process easy to control.

1, working power supply: AC 220V ±10%, 50HZ ±5%
2, Measuring range: AC 0-80kV (0-40kV)
3, error: ±(1%RD+1kV) (RD is the reading value)
4, display mode: LCD LCD display
5. Limited current: 10.5mA
6. Measurement accuracy: 1.0%
7, boost speed: 0-2.5kV /S±10%