Profile:
The device adopts the external power supply mode. First, remove the device and power box from the box, connect the sensor cable to the device chassis (sensor interface), connect the device and power box, and then plug in the power supply. At this time, the device and meter light up, clean the instrument data first during the test, press (O) key, and know the initial value.
The equipment base and the cylinder block are equipped with U-shaped slots, and the control switch is placed above the handle. Hold the device handle position with your thumb on the switch on the handle, clamp the U-shaped slot of the equipment base on the step of the insulated ladder and keep it. At this time, press U (rise key), and the motor starts the cylinder block action. When the sensor part touches the step, the numerical value of the digital display table will be displayed as the real pressure at this time. At this time, the mode of point-moving loading is adopted. When the pressure value reaches the standard force value of the insulation ladder, the loading is stopped.
After the test is over, install D (drop key) download, check the condition of the ladder after the test, if there is no damage, carry out the next step test.
Features:
The device is small in size and light in weight, and can be controlled by one hand.
The device adopts a large size digital display meter, which is intuitive and reliable.
The device is equipped with a buffer device to reduce the damage to the insulated ladder.
