Profile:
The test device consists of:
Operation test bench, 600V50HZ sine voltage generator, test electrode, touch screen controller four parts.
The test electrode combination includes: 1.) brass pressure electrode; 2.) Rubber sheet; 3.) Brass receiving electrode; 4.) Insulation board; 5.) Test fixed disk;
Features:
1, power frequency voltage generator: the output requirements are: 50Hz, the voltage RMS value is 600V sine voltage;
2, pressure electrode: the manufacturing material is brass; Load 2MΩ, total mass is 3kg;
3, voltage meter: the input impedance is greater than 10MΩ, the range is 600V, and the pressure electrode load resistance can be measured;
4, rubber plate: diameter of 400mm, thickness of 5±0.5mm rubber plate, its surface hardness is 60 to 65 degrees of Shaw level;
5. Receiving electrode plate: brass plate with diameter of 300mm and terminal post, thickness of 2mm;
6, insulation board: diameter of 400mm, thickness of 5mm, the material is epoxy board;
Parameter:
1, generator output voltage range: AC 0-800V ±5% (indicated value)
2, output power: AC 300W
3, output waveform: AC 50Hz sine wave
4. Minimum voltage display: 0.1V '
5, voltage measurement accuracy: 0.5
6, pressure electrode, receiving electrode: according to the standard manufacturing
7, the instrument working power supply: AC 220V±10% 50Hz
