KD2670J voltage breakdown tester according to its role can be called electrical insulation strength tester, dielectric strength tester, etc.
The working principle is that a voltage higher than normal operation is added to the insulator of the device under test for a specified period of time, and the voltage added to the above will only produce a small leakage current, so the insulation is better. The test system consists of three modules: program control power module, signal acquisition and conditioning module and computer control system. Select the two indicators of the voltage withstand meter: the maximum output voltage value and the maximum alarm current value.

1, AC DC 10KV general voltage tester
2, the output voltage through the regulator to adjust the output, with high reliability, high durability characteristics
3, the use of high brightness LED digital tube display test time, voltage, current, real-time display breakdown current value and voltage value
4, alarm current value can be preset continuously
5, the test time using three digit tube display
6. Select the signal input and output interface required by PLC, which can easily form a comprehensive test system with PLC

Output voltage (digital display KV) AC:0 ~ 5/10KV DC: ~ 5/10KV
Leakage current range (digital display mA)AC:0 to 2/20/100mA DC:0 to 2/20mA
Output power :1500VA
Output waveform: 50Hz/60HZ sine waveform of the power supply
Voltage display accuracy :±5%
Current display accuracy :±5%
Timing range (display meter):1 ~ 99 seconds ±1%
Power supply :AC 220V±10% 50Hz/60HZ
Power consumption :≤30W(static power consumption)